- Industria: Education; Oil & gas
- Number of terms: 4495
- Number of blossaries: 0
- Company Profile:
The Petroleum Extension Service (PETEX) is a unit of the Division of Continuing Education at The University of Texas at Austin and has been training companies and individuals since 1944.
a formation fluid sampling device, actually run on conductor line rather than wireline, that also logs flow and shut-in pressure in rock near the borehole. A spring mechanism holds a pad firmly against the sidewall while a piston creates a vacuum in a test chamber. Formation fluids enter the test chamber through a valve in the pad. A recorder logs the rate at which the test chamber is filled. Fluids may also be drawn to fill a sampling chamber. Wireline formation tests may be done any number of times during one trip in the hole, so they are very useful in formation testing.
Industry:Oil & gas
a rotating cylinder with side flanges on which wire or other rope used in machine operation is wrapped.
Industry:Oil & gas
a liquid, usually salt water or oil, but sometimes mud, used in a well when a packer is between the tubing and the casing. Packer fluid must be heavy enough to shut off the pressure of the formation being produced, and should not stiffen or settle out of suspension over long periods of time, and must be non-corrosive.
Industry:Oil & gas
any well that does not produce oil or gas in commercial quantities. A dry hole may flow water, gas, or even oil, but not in amounts large enough to justify production.
Industry:Oil & gas
a squeeze cementing method in which a packer is set to form a seal between the working string (the pipe down which cement is pumped) and the casing. Another packer or a cement plug is set below the point to be squeeze-cemented. By setting packers, the squeeze point is isolated from the rest of the well.
Industry:Oil & gas
a single well that produces from two separate formations at the same time. Production from each zone is segregated by running two tubing strings with packers inside the single string of production casing, or by running one tubing string with a packer through one zone while the other is produced through the annulus. In a miniaturized dual completion, two separate casing strings are run and cemented in the same wellbore.
Industry:Oil & gas
1. a material used in a cylinder on rotating shafts of an engine or pump in the stuffing box of a valve, or between flange joints to maintain a leak proof seal. 2. the specially fabricated filling in packed fractionation columns and absorbers.
Industry:Oil & gas
the lowering of mechanical tools, such as valves and fishing tools, into the well for various purposes. Electric wireline operations, such as electric well logging and perforating, involve the use of conductor line.
Industry:Oil & gas
