- Industria: Government
- Number of terms: 22108
- Number of blossaries: 0
- Company Profile:
The measure of closeness in shape between a waveform and it's fundamental component.
Industry:Energy
The measure of overall efficiency for a variety of appliances. For water heaters, the energy factor is based on three factors: 1) the recovery efficiency, or how efficiently the heat from the energy source is transferred to the water; 2) stand-by losses, or the percentage of heat lost per hour from the stored water compared to the content of the water: and 3) cycling losses. For dishwashers, the energy factor is defined as the number of cycles per kWh of input power. For clothes washers, the energy factor is defined as the cubic foot capacity per kWh of input power per cycle. For clothes dryers, the energy factor is defined as the number of pounds of clothes dried per kWh of power consumed.
Industry:Energy
The measure of seasonal or annual efficiency of a heat pump operating in the heating mode. It takes into account the variations in temperature that can occur within a season and is the average number of Btu of heat delivered for every watt-hour of electricity used by the heat pump over a heating season.
Industry:Energy
The measure of seasonal or annual efficiency of a residential heating furnace or boiler. It takes into account the cyclic on/off operation and associated energy losses of the heating unit as it responds to changes in the load, which in turn is affected by changes in weather and occupant controls.
Industry:Energy
The measure of the efficiency of fluorescent lamp ballasts. It is the relative light output divided by the power input.
Industry:Energy
The measure of the instantaneous energy efficiency of room air conditioners; the cooling capacity in Btu/hr divided by the watts of power consumed at a specific outdoor temperature (usually 95 degrees Fahrenheit).
Industry:Energy
The minimum temperature at which combustion of a solid or fluid can occur.
Industry:Energy
The minimum temperature at which sufficient vapor is released by a liquid or solid (fuel) to form a flammable vapor-air mixture at atmospheric pressure.
Industry:Energy
