- Industria: Education; Oil & gas
- Number of terms: 4495
- Number of blossaries: 0
- Company Profile:
The Petroleum Extension Service (PETEX) is a unit of the Division of Continuing Education at The University of Texas at Austin and has been training companies and individuals since 1944.
a bridge plug or cement plug placed near the bottom of the hole to shut off a depleted, water-producing, or unproductive zone.
Industry:Oil & gas
the use of the energy that arises from the expansion of compressed gas in a reservoir to move crude oil to a wellbore. Also called depletion drive. See dissolved-gas drive, gas-cap drive, reservoir drive mechanism.
Industry:Oil & gas
the first stage of oil production in which natural reservoir drives are used to recover oil, although some form of artificial lift may be required to exploit declining reservoir drives.
Industry:Oil & gas
1. the pressure at the bottom of a borehole. It is caused by the hydrostatic pressure of the wellbore fluid and, sometimes, by any backpressure held at the surface, as when the well is shut in with blowout preventers. When mud is being circulated, bottomhole pressure is the hydrostatic pressure plus the remaining circulating pressure required to move the mud up the annulus. 2. the pressure in a well at a point opposite the producing formation, as recorded by a bottomhole pressure measuring device.
Industry:Oil & gas
the injection of gas into a reservoir to maintain formation pressure by gas drive and to reduce the rate of decline of the original reservoir drive. One type of gas injection uses gas that does not mix (is not miscible) with the oil. Examples of these gases include natural gas, nitrogen, and flue gas. Another type uses gas that does mix (is miscible) with the oil. The gas may be naturally miscible or become miscible under high pressure. Examples of miscible gases include propane, methane enriched with other light hydrocarbons, methane under high pressure, and carbon dioxide under pressure. Frequently, water is also injected in alternating steps with the gas.
Industry:Oil & gas
1. the phase of the petroleum industry that deals with bringing the well fluids to the surface and separating them and storing, gauging, and otherwise preparing the product for delivery. 2. the amount of oil or gas produced in a given period.
Industry:Oil & gas
a test that measures the reservoir pressure of the well, obtained at a specific depth or at the midpoint of the producing zone. A flowing bottomhole pressure test measures pressure while the well continues to flow; a shut-in bottomhole pressure test measures pressure after the well has been shut in for a specified period of time. See bottomhole pressure.
Industry:Oil & gas
a well into which gas is injected for the purpose of maintaining or supplementing pressure in an oil reservoir.
Industry:Oil & gas
the last string of casing set in a well, inside of which is usually suspended a tubing string.
Industry:Oil & gas
any of the rod pumps, high-pressure liquid pumps, or centrifugal pumps located at or near the bottom of the well and used to lift the well fluids. See centrifugal pump, hydraulic pumping, submersible pump, sucker rod pumping.
Industry:Oil & gas
